IB_KH3462_E3341_LB3 04.03.2008 15:47 Uhr
Seite 5
•First place the plastic disc and then the metal disc of the biscuit attachment q into the meat grinder casing t (see
Position the biscuit attachment q so that the indentations on the biscuit attachment q lie on the fixing points in the meat grinder casing t.
•When everything has been correctly assembled, screw the ring clamp a on until it is handtight.
•
•Assemble the meat grinder casing t as described under a).
•To dismantle it, you must first remove the pattern strips q before you can screw open the ring clamp a and take the biscuit attachment q out.
6. Operation
Important!:
Do not use the appliance for longer than 15 minutes continuously. To avoid an overheating of the app- liance, after such a period switch it off and allow it to cool down for ca. 30 minutes.
Important!:
NEVER activate the buttons ON or REV, with a change of rotation direction, if the appliance motor has not come to a complete stop. This could damage the motor.
a) Operating the appliance
Once the appropriate attachments have been fixed:
•Place the appliance where it will at all times be absolutely stable and under no circumstances could it fall off of the work surface or in any way come into contact with water (due to vibrations or becoming snagged in the power cable). Vi- bration is unavoidable when it is working.
Warning:
Never touch a machine, which is plugged in or is operational when it happens to fall or land in water
–or in the case of other emergencies! First unplug the appliance in all emergency situations! Otherwise one runs the risk of serious injury or loss of life!
•Place the food to be processed into the feed tray e and position a container under the exit ope- ning to collect the processed food.
•First press the OFF button to check that the appli- ance is still switched off. Otherwise there is a risk that the appliance could unintentionally start when the plug is inserted into the power socket.
•Then put the plug into the socket.
•Press the button ON to start the appliance.
•Now push in the food into the feeding shaft with the round stodger w – NEVER with one’s fingers, forks, spoons or similar object. This could lead to injury and also damage the appliance.
Important!:
Do not ever press so hard that the motor gets audibly slower. This could overburden the machine under pressure and damage it.
b) Processing meat
•Only use meat pieces which are not larger than 2 cm. Check that the meat does not have any bones and or tendons.
- 5 -
