Konica Minolta VI-9i, VIVID 9i manual

NON-CONTACT 3D DIGITIZER

VIVID 9i/VI-9i

Instruction Manual (HARDWARE)

NOTE

The VI-9i is model name for Europe and the VIVID 9i is model name for other countries. Please note that the VIVID 9i model name is intended only for reference with this manual.

Contents

Page Safety Symbols Notes on this Manual About This Manual and Related Documents Safety Precautions Laser Caution and Identification Label Warning Label Notes On Use Care On Storage Notes On Cleaning Notes On Maintenance Contents Page Page Package Contents (Standard Accessories) Lens Field Calibration System Tripod Attachment Set Optional Accessories System Configuration Names and Functions of Parts Main Body Operation Panel Page Page Connecting the AC Power Cord Connecting the VIVID 9i to a Computer Setting the SCSI ID No Setting the Terminator 7 Press Starting and Quitting Starting the VIVID 4 Press any key Quitting the VIVID Mounting to the Tripod 2. Mounting the Instrument to the Panhead Remove the accessory plate from the panhead Place the top of the accessory plate on the tri plied with the accessory plate) Make sure that the tripod/panhead is secured in place Page Page Replacing the Lens and Field Calibration Relationship between Measurement Distance and Object Replacing Procedure Hold the external edge of the fixing ring and pull it out 4 Attach the desired lens Turn the lens fixing ring clockwise to secure the lens 6 Attach the lens hood system Field Calibration Field Calibration System Page Executing Field Calibration Assembling the Field Calibration System Attach the Unit Attachment Section to the Field Calibration System Unit Section Attach the VIVID 9i Attachment Section to the main unit Field Calibration System Preparation Executing Field Calibration Click the [Calibration] button 6 Check that field calibration was successful Message Meaning What To Do Click the [Cancel] button Ending Field Calibration Disassembling the Field Calibration System Adjusting the White Balance following settings <Setting 7 Press ENTER Displaying the Status Information Adjusting the Laser Power and CCD Gain Manually Setting the Scan Mode Page Error Messages Explanation of Measuring Principle Measuring Principle High-SpeedImage Processing Circuit Time center of gravity and Space center of gravity Dimension Diagram Specifications