Konica Minolta VI-9i, VIVID 9i Setting the SCSI ID No, Press, Press, Press, Press, Press, Press, Press, SI ID”, (or ENTER ), (or ENTER ), SI SETTINGS”, [Setting Procedure]

Connecting the VIVID 9i to a Computer

Setting the SCSI ID No.

In order for the computer to recognize that the VIVID 9i is connected to the computer via the SCSI interface, a SCSI ID No. (0 to 6) must be set for the VIVID 9i.

Memo

SCSI ID No. 5 has been set as the default setting before shipment.

Note

If other devices are connected to the computer via the SCSI interface, make sure that the SCSI ID No. of the VIVID 9i differs from those set for the devices.

[Setting Procedure]

1	Press .
	The MENU view will appear.
2	Press	to locate the arrow cursor to “SC-
	SI SETTINGS”.

STANDARD 3 HQ ON NF ON COLOR OFF

W.B. DEFAULT SCSI 5 ENABLED

WHITE BALANCE

INITIAL MODE INITIAL CONDITION

→SCSI SETTINGS INFO

3		SELECT
	Press	(or ENTER ).
	The SCSI SETTINGS view will appear.		SCSI SETTINGS
			→	5
			SCSI ID
4	Press	to locate the arrow cursor to “SC-	TERMINATE	ENABLED
	SI ID”.

5		SELECT
	Press	(or ENTER ).
	The currently selected SCSI ID No. will turn to pink.
6	Press	to select the desired SCSI ID No.
	<Settings>
	• 0 to 6: SCSI ID No.
7	Press	ENTER .
	Setting is now complete.

Note

To cancel the setting and return the SCSI SETTINGS

CANCEL

screen to its original state, press .

SCSI SETTINGS

SCSI ID 6

TERMINATE ENABLED

18