Safety Precautions
When using this hardware, the following points must be strictly observed to ensure correct and safe use. After you have read this manual, keep it in a safe place so that it can be referred to easily whenever it is needed.
WARNING | Failure to adhere to the following points may result | |
in death or serious injury. |
| |
|
| |
Do not use the VIVID 9i in places where flam- | Do not disassemble or modify the VIVID 9i. | |
mable or combustible gases (gasoline etc.) are | Doing so may cause a fire or electric shock. | |
present. Doing so may cause a fire.
Always use the AC power cord supplied as a | Do not remove the cover as doing so may cause | ||
standard accessory with the VIVID 9i, and con- | electric shocks. | ||
nect it to an AC outlet |
| ||
60 Hz). Failure to do so may damage the VIVID |
| ||
9i, causing a fire or electric shock. |
| ||
|
| ||
Do not bend, twist or pull the AC power cord ex- | Take special care not to allow liquid or metal ob- | ||
cessively. In addition, do not place heavy items | jects to enter the VIVID 9i. Doing so may cause | ||
on the AC power cord, or damage or modify it in | a fire or electric shock. Should liquid or metal | ||
any way. Doing so may cause damage to the AC | objects enter the VIVID 9i, turn the power OFF | ||
power cord, resulting in fire or electric shock. | immediately, disconnect the AC power cord | ||
from the AC outlet, and contact the nearest | |||
|
| ||
|
| KONICA MINOLTA | |
|
| service facility. | |
If the VIVID 9i will not be used for a long time, | The VIVID 9i should not be operated if dirt or | ||
disconnect the AC power cord from the AC out- | dust has entered through the vent holes. Doing | ||
let. Accumulated dirt or water on the prongs of | so may result in a fire. For periodic inspection, | ||
the AC power cord’s plug may cause a fire. If | contact the nearest KONICA MINOLTA SENS- | ||
there is any dirt or water on the prongs of the AC | |||
| |||
power cord’s plug, remove it. |
|
| |
|
| ||
When disconnecting the AC power cord’s plug, | Never stare into the laser emitting | ||
always hold the plug and pull it to remove it. | window. | ||
Never pull the AC power cord itself. Doing so |
| ||
may damage the AC power cord, causing a fire |
| ||
or electric shock. In addition, do not insert or |
| ||
disconnect the AC power cord’s plug with wet |
| ||
hands. Doing so may cause electric shock. |
| ||
|
| ||
The VIVID 9i should not be operated if it is | Do not place a lens, mirror or optical | ||
damaged, or smoke or odd smells are detected. | element in the passage of the laser | ||
Doing so may result in a fire. In such situations, | beam. Doing so may converge the la- | ||
turn the power OFF immediately, disconnect the | ser beam, resulting in damage to your | ||
AC power cord from the AC outlet, and contact | eyes, burns or fire. To prevent the | ||
above accidents, make sure that a wall | |||
the nearest KONICA MINOLTA | |||
or similar which can block the laser | |||
thorized service facility. |
| ||
| beam is located behind the object. | ||
|
| ||
|
| ||
|
| ||
CAUTION | Falling to adhere to the following points may result in | ||
injury or damage to the instrument or other property. | |||
Be sure to connect the AC power cord’s plug to an AC outlet that has a grounding terminal.
Make sure that the AC outlet is located near the VIVID 9i and that the AC power cord’s plug can be easily connected and disconnected.
Do not place the instrument on an unstable or sloping surface. Doing so may result in its dropping or overturning, causing injury. Take care not to drop the instrument when carrying it.
1