Manuals / Brands / Computer Equipment / Graphics Tablet / Konica Minolta / Computer Equipment / Graphics Tablet

Konica Minolta VI-9i, VIVID 9i Names and Functions of Parts, Main Body, WARNING

1 56

Download 56 pages, 4.8 Mb

Names and Functions of Parts

Main Body

Power Switch

AC Power

Connector

SCSI Port

Handle

Light-Receiving Lens

Note Please keep the receiving lens cap and the laser barrier place in place when you are not carrying out scan- ning. Dust and scratches on the laser and lens can ad- versely affect scanning pre- cision.

Laser Emitting Window

WARNING

A laser beam is emitted from this window.

Do not stare into this window.

Rubber supports

Use when necessary to lean the device on its side for installing the tripod attach- ment, etc.

Viewfinder (5.7" LCD)

Displays the lens image and various setup menus.

Note In rare cases some dot breakup may be visible on the LCD, but this does not indicate a problem with the scan data itself.

Operation Panel

Used for adjusting the focus and making various settings.

Rubber supports Support the device.

12

Contents

Page Safety Symbols Notes on this Manual About This Manual and Related Documents Safety Precautions Laser Caution and Identification Label Warning Label Notes On Use Care On Storage Notes On Cleaning Notes On Maintenance Contents Page Page Package Contents (Standard Accessories) Lens Field Calibration System Tripod Attachment Set Optional Accessories System Configuration Names and Functions of Parts Main Body Operation Panel Page Page Connecting the AC Power Cord Connecting the VIVID 9i to a Computer Setting the SCSI ID No Setting the Terminator 7 Press Starting and Quitting Starting the VIVID 4 Press any key Quitting the VIVID Mounting to the Tripod 2. Mounting the Instrument to the Panhead Remove the accessory plate from the panhead Place the top of the accessory plate on the tri plied with the accessory plate) Make sure that the tripod/panhead is secured in place Page Page Replacing the Lens and Field Calibration Relationship between Measurement Distance and Object Replacing Procedure Hold the external edge of the fixing ring and pull it out 4 Attach the desired lens Turn the lens fixing ring clockwise to secure the lens 6 Attach the lens hood system Field Calibration Field Calibration System Page Executing Field Calibration Assembling the Field Calibration System Attach the Unit Attachment Section to the Field Calibration System Unit Section Attach the VIVID 9i Attachment Section to the main unit Field Calibration System Preparation Executing Field Calibration Click the [Calibration] button 6 Check that field calibration was successful Message Meaning What To Do Click the [Cancel] button Ending Field Calibration Disassembling the Field Calibration System Adjusting the White Balance following settings <Setting 7 Press ENTER Displaying the Status Information Adjusting the Laser Power and CCD Gain Manually Setting the Scan Mode Page Error Messages Explanation of Measuring Principle Measuring Principle High-SpeedImage Processing Circuit Time center of gravity and Space center of gravity Dimension Diagram Specifications