Manuals / Brands / Computer Equipment / Graphics Tablet / Konica Minolta / Computer Equipment / Graphics Tablet

Konica Minolta VI-9i, VIVID 9i Setting the Terminator, Press, Press, Press, ENABLED:, <Settings, DISABLED:, (or ENTER ), SI SETTINGS”, Press (or ENTER ), to select “ENABLED” or “DISA

1 56

Download 56 pages, 4.8 Mb

Connecting the VIVID 9i to a Computer

Setting the Terminator

The VIVID 9i has a built-in SCSI terminator. The terminator is required if the VIVID 9i is the last device of those connected in series to the SCSI interface (i.e., if only one of the SCSI ports on the VIVID 9i is used).

If the terminator is not set correctly, the VIVID 9i or devices connected to the SCSI interface may mal- function.

Memo

“ENABLED” has been selected as the default setting before shipment.

Note

“DISABLE” must be selected if the VIVID 9i is connected via the SCSI interface but is not the last device of those connected in series, and “ENABLE” must be selected if it is not connected via the SCSI interface.

[Setting Procedure]

1	Press .
	The MENU view will appear.
2	Press	to locate the arrow cursor to “SC-
	SI SETTINGS”.

STANDARD 3 HQ ON NF ON COLOR OFF

W.B. DEFAULT SCSI 5 ENABLED

WHITE BALANCE

INITIAL MODE INITIAL CONDITION

→SCSI SETTINGS INFO

3

4

SELECT

Press (or ENTER ).

The SCSI SETTINGS view will appear.

Press to locate the arrow cursor to “TERMINATE”.

SCSI SETTINGS

SCSI ID 5

→TERMINATE ENABLED

5	SELECT
5	Press	(or ENTER ).
	The currently selected option (ENABLED or DISA-
	BLED) will turn to pink.
6	BLED”.Press	to select “ENABLED” or “DISA-

<Settings>

•ENABLED: Select this option if the terminator is to be used.

•DISABLED: Select this option if the terminator is not to be used.

SCSI SETTINGS

SCSI ID 5

TERMINATE ENABLED

19

Contents

Page Safety Symbols Notes on this Manual About This Manual and Related Documents Safety Precautions Laser Caution and Identification Label Warning Label Notes On Use Care On Storage Notes On Cleaning Notes On Maintenance Contents Page Page Package Contents (Standard Accessories) Lens Field Calibration System Tripod Attachment Set Optional Accessories System Configuration Names and Functions of Parts Main Body Operation Panel Page Page Connecting the AC Power Cord Connecting the VIVID 9i to a Computer Setting the SCSI ID No Setting the Terminator 7 Press Starting and Quitting Starting the VIVID 4 Press any key Quitting the VIVID Mounting to the Tripod 2. Mounting the Instrument to the Panhead Remove the accessory plate from the panhead Place the top of the accessory plate on the tri plied with the accessory plate) Make sure that the tripod/panhead is secured in place Page Page Replacing the Lens and Field Calibration Relationship between Measurement Distance and Object Replacing Procedure Hold the external edge of the fixing ring and pull it out 4 Attach the desired lens Turn the lens fixing ring clockwise to secure the lens 6 Attach the lens hood system Field Calibration Field Calibration System Page Executing Field Calibration Assembling the Field Calibration System Attach the Unit Attachment Section to the Field Calibration System Unit Section Attach the VIVID 9i Attachment Section to the main unit Field Calibration System Preparation Executing Field Calibration Click the [Calibration] button 6 Check that field calibration was successful Message Meaning What To Do Click the [Cancel] button Ending Field Calibration Disassembling the Field Calibration System Adjusting the White Balance following settings <Setting 7 Press ENTER Displaying the Status Information Adjusting the Laser Power and CCD Gain Manually Setting the Scan Mode Page Error Messages Explanation of Measuring Principle Measuring Principle High-SpeedImage Processing Circuit Time center of gravity and Space center of gravity Dimension Diagram Specifications