Konica Minolta VI-9i, VIVID 9i the lens, pull it out, 4 Attach the desired lens, Hold the external edge of the fixing ring and, Turn the lens fixing ring clockwise to secure

Replacing the Lens and Field Calibration

3	Hold the external edge of the fixing ring and
	pull it out.

Memo

Hold the ring with your finger located near the red mark on the lens. This will facilitate pulling the lens.

Note

Attach the lens cap to the removed lens, place it in the lens case and keep it in a safe place.

The following information will appear in the viewfind- er as shown on the right.

4 Attach the desired lens.

•Remove the lens cap.

•Align the red mark on the lens with the one on the lens mount socket, and insert the lens until a click is heard.

Memo

Hold the ring with your finger located near the red mark on the lens. This will facilitate inserting the lens.

5	Turn the lens fixing ring clockwise to secure
	the lens.

Note

After tightening the lens, make sure that the red mark on the ring is aligned with the red mark on the body.

Tightening ring

Red mark

CHANGE LENS

S/N2001005

PRESS ANY KEY

AND SCAN FIELD CALIBRATION SYSTEM

Red mark

30