Set the light source so that the lighting condition is the same as that under which scan is to be performed.
Adjusting the White Balance
The color of an object varies slightly depending on the type of light source. To acquire accurate color image data, adjust the white balance as described below under the light source to be used.
When scanning, we recommend that you use a stable,
Memo
The white balance has been adjusted under fluorescent light before shipment.
[Operating Procedure]
1
2 Attach the white balance cap to the VIVID 9i as illustrated.3 | Press . |
|
| The MENU view will appear. | |
4 | Press | to locate the arrow cursor to |
“WHITE BALANCE”. |
STANDARD 3 HQ ON NF ON COLOR OFF
W.B. DEFAULT SCSI 5 ENABLED
→WHITE BALANCE
INITIAL MODE
INITIAL CONDITION
SCSI SETTINGS
INFO
42