Adjusting the Laser Power and CCD Gain Manually
With certain objects, correct image data cannot be obtained.
In this case, adjust the laser power and CCD gain as explained below.
Adjustment must be made using the Polygon Editing Tool software. For information about how to proceed, refer to the software’s operation manual.
Memo
With the following objects, correct data may not be acquired, the laser power or CCD gain must be adjusted manually.
•Glass etc. which transmit light
•Mirrors etc. which cause mirror reflection
•Electric bulbs etc. which themselves illuminate
•Black or blue cloth which has a low reflectance for red and similar colors
45