Mounting to the Tripod

2. Mounting the Instrument to the Panhead

After you have attached the tripod attachment to the instrument, they need to be mounted to the recommended panhead as explained below.

First, remove the accessory plate from the panhead, attach it to the instrument, then attach both to the panhead.

Memo

Three screw holes are provided on the back of the tripod attachment, to allow mounting the tripod attachment to the pan- head.

[Operating Procedure]

1

2

Remove the accessory plate from the panhead.Place the top of the accessory plate on the tri-

pod attachment (attached to the instrument), Accessory Plate and secure them with two screws (U3/8, sup-

plied with the accessory plate).

U3/8 Screw

3

4

Make sure that the tripod/panhead is secured in place.

Slide the accessory plate (attached to the tripod attachment on the instrument) into the panhead.

Memo

Slide and attach the plate from front of the panhead.

5 Tighten the slide fixing knob to firmly secure the accessory plate to the panhead.

Memo

Refer to the tripod/panhead instruction manual for details on using the accessory plate locking knob.

25