Konica Minolta VI-9i, VIVID 9i Field Calibration System Preparation, WIDE lens, tem Unit Section, Open the cover of the Field Calibration Sys, Open the Field Calibration System Unit for the

Field Calibration

Field Calibration System Preparation

There are two types of field calibration systems: one for WIDE lens type use and the other for MIDDLE/TELE lens type use. Use the Field Calibration System that corresponds to the type of lens the main unit is equipped with.

[Procedure]

• Preparing the Wide Lens Field Calibration System

1	Open the cover of the Field Calibration Sys-
	tem Unit Section.

1Pull Lock Lever A down to the UNLOCK posi- tion.

2Grasp Handle A and Handle B with both hands and pull to spread open.

Note

There may be instances where the Field Calibration System for the WIDE lens will slightly jut out when the Unit Section Cover is opened.

When using the Field Calibration System for the WIDE lens, gently push on it to return the Field Calibration System to the unit side.

•Preparing the MIDDLE/TELE Lens Field Calibration Sys- tem

1	Open the Field Calibration System Unit for the
	WIDE lens.

1Pull Lock Lever B down to the UNLOCK posi- tion.

2Grasp Handle B and the Support Section of the Field Calibration System Section using both hands and pull to spread open.

Memo

The Field Calibration System for the MIDDLE/TELE lens may be opened using the procedure for opening the Field Calibration System unit for the WIDE lens or it may be opened by opening the Unit Section Cover and then opening the Field Calibration System for the WIDE lens.

Pull Lock Lever A down to

the UNLOCK position.

Grasp firmly with both hands and pull to open.

1 2

* There may be cases in which the Field Calibration System for the WIDE lens type will jut out slightly when the Unit Section Cover is opened, so gently push on it to return it to its position.

Pull Lock Lever B down
to the UNLOCK posi-	Grasp firmly with
tion.	both hands and pull
	to open.
1
	2

36