Disconnecting the camera from a computer
Never disconnect the camera when the access lamp is red – the data
or memory card may permanently be damaged.
Windows®XP, 2000 Professional, and Me
To disconnect the camera, click once on the unplug-or-eject-hardware icon located on the task bar. A small window will open indicating the device to be stopped.
Click on the small window to stop the device. The safe-to-remove-hardware window will open. Click on “OK” to close the window, turn the camera off, and then disconnect the USB cable.
When more than one external device is connected to the computer, repeat the procedure above except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware window after clicking on the small window indicating the unplug-or-eject-hardware routine.
108 DATA-TRANSFER MODE
