Connecting the camera to a computer
A fully charged battery should be used when the camera is connected to a computer. The use of the AC adapter set (sold separately) is recommended over the use of the battery. For users with Windows®98 or 98SE, read the section on page 102 on how to install the necessary USB driver before connecting the camera to a computer.
1.Start up the computer. The computer must be turned on before connecting the camera.
2.Insert the memory card into the camera. To change the memory card while the camera is con- nected to a computer, see page 108.
3.Slide the
firmly attached.
4. Attach the other end of the USB cable to the computer’s USB port. Make sure the plug is firmly attached. The camera should be connected directly to the computer’s USB port. Attaching the camera to a USB hub may prevent the camera from operating properly.
5 Turn on the camera to initiate the USB connection. While the camera is connected to a computer, the
