Konica Minolta xg instruction manual Custom FX recording, Microphone

Custom FX recording

A personalized sound effect can be recorded for the focus signal and shutter release. The camera uses an audio signal to indicate the camera has focused.

Audio signals

Shutter FX

CustomRecord Focus signal

Volume	Shutter FX
Power off	3 min.

To make a custom recording, select either focus signal or shutter FX from the Cust. FX rec. option on the setup menu. Messages will appear during the routine.

Press the shutter-release button to begin the recording of the

Press shutter buttonshutter sound effect. to record.

Microphone

Recording audio.

Press shutter to stop.

During the recording, hold the camera’s microphone approximately 20cm (8 in.) from the audio source. Up to four seconds of audio can be recorded. The remaining recording time is indicated by a status bar and the frame counter on the monitor. The recording will end when the shutter-release button is pressed again or recording time has elapsed.

The length of the recording will affect the performance of the camera. The longer the recorded sound effect, the longer the delay between image capture. This can have a significant affect on the continuous-advance frame rate.

Remaining recording time

94 SETUP MODE