The RC Configuration Software
4.2.3.2Creating an IR Command
To create IR commands for a selected device, connect the RC device directly1 to your PC via the USB connector and use the remote control transmitter2 to learn its IR commands.
To write a new IR command to the RC device:
1.Click the New button in the IR commands area to type the new command name.
The following window appears:
Figure 11: New IR Command Window
2.In the Command area, click the Connect to IR Capture Device button (see Figure 13), select the port and click OK:
Figure 12: Connect to IR Capture Device Window
3.Click the Read IR button to read the command.
The command area displays the following message: “Ready for reading IR command. Please send IR command to the device”.
4.Press the appropriate button on the remote control transmitter.
The command area displays the following message: “IR command reading”. The IR command appears, as illustrated in Figure 13:
1 Whether it is defined as a Slave or a standalone Master
2 Of the machine from which you want to learn the IR commands. For example, use the DVD control transmitter to write the DVD commands to the driver manager
12 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
