The RC Configuration Software
4 The RC Configuration Software
The Kramer RC Configuration 2 software lets you set a sequence of commands (the macro) and assign them to any of the buttons on the RC device.
The Kramer RC Configuration 2 software lets you:
Create your own device drivers manually or via the IR learner feature
Write, modify or delete commands
Change the order of commands within the macro
Set delay times between commands in a macro
Set the button lighting and color
Change text on the LCD displays on the RC units
Save multiple sets of RC device configurations
Read macros from the RC device
The RC buttons can be configured prior to installation
The following sections describe how to:
Install the software (see section 4 .1)
Download the device drivers (see section 4 .2)
Create Serial and IR commands (see section 4 .2.3)
Map the ports (see section 4 .3)
Use the Kramer RC Configuration main window (see section 4 .4)
Write a macro (see section 4 .4.1)
4.1Installing the Software
Prior to using the Kramer RC Configuration 2 software, make sure that the “.NET Framework” Revision 2.0 software is installed on your PC. If it is not, you need to install it:
If you have a fast Internet connection, this software is automatically installed during the installation of the Kramer RC Configuration 2 software
If you do not have a fast Internet connection, insert the
1 File names are liable to change
2 Installation may take about 15 minutes
4 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
