Manuals / Kramer Electronics / TV and Video / Universal Remote

Kramer Electronics RC-SV manual Downloading and Installing the Drivers

Models: RC-SV

1 42

Download 42 pages 42.22 Kb

Page 10

4.2Downloading and Installing the Drivers

The RC Configuration Software

5. Select or create a new working directory1 (see Figure 4).

Figure 4: Change Working Directory Window

6.Continue to run the setup according to the installation instructions.

4.2Downloading and Installing the Drivers

The RC system peripheral devices have device drivers that let them communicate with computers. The device driver needs to be installed so that the computer can recognize it and control it. The Kramer RC Configuration 2 software uses driver commands to control these peripheral devices.

4.2.1Download the Drivers

Check—according to your list of peripheral devices (see the example in Figure 1) —that you have all the required drivers:

Kramer machines have drivers that are provided within the package

Other peripheral device drivers that are included in the package

Download the required drivers to a folder (for example, C:\Media-Room- 1\Peripheral Device Drivers).

1 The working directory will keep the information that is essential for operating the software. This information will remain unchanged while upgrading the software

6	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 10

Kramer Electronics RC-SV manual Downloading and Installing the Drivers

Contents

RC-SV Configuration Guide RevisionThe Kramer RC Configuration Menus ContentsThe RC Configuration Software Connecting a Room Controller as a Stand Alone Device MasterFigures KRAMER SIMPLE CREATIVE TECHNOLOGYTables 1 Introduction 2 Overview2.1 System Requirements for the Kramer RC Configuration 2 Software 3 Initial Planning The Kramer RC Configuration 2 software lets you 4 The RC Configuration Software4.1 Installing the Software 3. Install the Kramer RC Configuration 2 application 4. Click OK The following window appears see Figure4.2 Downloading and Installing the Drivers 1. Open the Kramer RC Configuration 2 program To access the Driver Manager windowFigure 7 Exporting a Kramer Driver File Figure 8 and Table 1 define the Driver Manager windowFigure 6 Importing a Kramer Driver File KRAMER SIMPLE CREATIVE TECHNOLOGYThe RC Configuration Software Figure 8 The Driver Manager WindowFeature Table 1 Driver Manager Window FeaturesFunction Serial commands see section 4 IR commands see section 4 To write a new IR command to the RC device 4.3 Port Mapping by some devicesFigure 15 The Sony DVD Player in the RC Command Area Figure 16 The Port Manager WindowFigure 17 The Kramer RC Configuration Main Window 4.4 The Kramer RC Configuration Main WindowTable 2 The Port Manager Window Features The ItemFunction Table 3 Kramer RC Configuration Window FeaturesFeature Device AreaFigure 18 Event Macros Tab FeatureFigure 18 shows the Event Macros Tab Function4.4.1.1 The IR, RS-232 and RS-485 Ports RC Command Area Figure 19 Using the Toggle 1-2-3-4 Behavior4.4.1 The RC Command Area Figure 20 IR, RS-232 and RS-485 Port RC Command Area4.4.1.4 The Keypad LCD Port RC Command Area 4.4.1.3 The Switcher Port RC Command AreaFigure 22 Switcher Port RC Command Area Figure 23 Switcher Port RC Command Area5 Creating a Macro Figure 27 Creating a New Command Figure 28 Selecting the Port5.1 Labeling the Buttons 5.2 Creating a Driver Command 5.2.1 An RS-232 Command - Switch Input to Output1. Select the Relay Port for example, RELAY1 5.2.4 A Power Amplifier Command Figure 34 Switcher RC CommandFigure 35 High Volume RC Command Figure 36 Keypad LCD RC Command 5.2.5 An LCD Keypad Command5.2.6 Setting the Button State and Color 1. Select the IGNORE BUTTON Port Figure 39 Ignore RC Command 6 The Kramer RC Configuration Menus6.1 The File Menu Table 5 File Menu FeaturesTable 6 Edit Menu Features 6.3 The Configuration Menu6.2 The Edit Menu Table 7 Configuration Menu Features6.4.1 The Connect Command 6.4 The Device MenuTable 8 Device Menu Features Menu CommandFeature 6.5 The Help MenuTable 11 Help Menu Features Menu Command6.6 Load Firmware 4. Connect to the device 7 Connecting a Room Controller as a Stand Alone Device Master 7.1 The Port Manager in the Stand Alone Mode 7.2 The Device Properties Window in the Stand Alone Mode2. Select Properties 8 Connecting via the ETHERNET8.1 Connecting the ETHERNET Port directly to a PC Crossover Cable 4. Select Properties9 Writing a Configuration To write a configuration to the device, do the following