Kramer Electronics RC-SV manual Creating a New Command, Selecting the Port

Creating a Macro

Figure 27: Creating a New Command

3.Select a port1 from the drop-down box (for example, the RS-232 terminal block). The default driver appears.

4.Select a command from the Driver command area and write its description. Click the up or down arrow to save the command to the macro:

Figure 28: Selecting the Port

5.Repeat this process to add new commands. Click Duplicate to duplicate the command and delete a command by clicking the Delete button.

6.If required, set a delay time after the command or set the button lighting:

1 This is an example. The RC command area appears different for different ports, as described in section 5￿ .2

21