Kramer Electronics RC-SV manual Serial commands see IR commands see

The RC Configuration Software

4.2.3Creating a Driver Command

You can write two types of commands to a connected device (for example, a DVD1):

￿Serial commands (see section 4￿ .2.3.1)

￿IR commands (see section 4￿ .2.3.2)

4.2.3.1Creating a Serial Command

To write the serial commands for the selected device, click the New button in the Serial Commands area. The New Serial Command window appears. Type the new command name:

Figure 9: New Serial Command Window

A Serial Command type area appears, as illustrated in Figure 10.

Figure 10: Writing the Serial Commands

The serial commands created can be sent via the RS-232 and RS-485 ports.

1 Or a Kramer machine

11