Kramer Electronics RC-SV manual Shows the Event Macros Tab

The RC Configuration Software

#		Feature	Function
Button Macro Area
11	Button Macro Display Box		Displays the macro RC commands’ Description, Delay and Port
			in sequence. Select an RC command to duplicate, delete, or
			change its position in the sequence
	New Command Button		Click to add a new command to the Button Macro display box1
			(see section 4￿ .4.1)
	Duplicate Command Button		Duplicate a command in the Button Macro display box
	Delete Command Button		Delete a command from the Button Macro display box
		Button	Move up the selected command
		Button	Move down the selected command
12	RC command Area (see section		Appears different for different ports and includes the following
	4￿ .4.1)		features of the command selected in the Button Macro display
			box:
	Description Text Box		Optional descriptive text for the command
	Port Drop-down Box		Displays the port associated with the RC command: Select a port
			when modifying or writing a new RC command
13	Delay after command Text Box2		Set a delay time following the command3
15	Button lighting Area2		Select the buttons that will illuminate, turn dark or remain the same
			following a command (the lighting configuration can be different for
			each command within the sequence). Toggle between ON (yellow),
			OFF (black) and No Change (gray). You can also click reset to
			reset the buttons to No Change (gray)

Figure 18 shows the Event Macros Tab:

Figure 18: Event Macros Tab

1 The button macro display box displays <No Description> under Description and None under Port 2 Shows after checking this option in the configuration menu (see section 6￿ .3)

3 In seconds or milliseconds, via check box

17