Installer setup − Page 6 of 8
If you select reset and then confirm, the highlighted device will be reset to its factory setting. You would see a screen similar to figure 14, but ref- erencing only the selected device.
Resetting ALL devices to their factory default settings will cause the system to restart the setup process. If you want to continue, then press ’confirm’ or press ’cancel’.
confirmcancel
After a reset, the device which had its settings reset to default will display in the system devices screen in red type. You will be required to highlight the red−type de- vice(s) and use edit (see figure 12) to change, or at least view the changed settings of the red−type de- vices .
In the edit mode, the feature list will show the selected device’s changed features in red type. Use the up/ down arrows to select each red−typed feature and press edit. Make changes to the settings using the Edit tools if desired, or at least, press save in each fea- ture screen. Upon saving, the previous screen will display and the type will again be black. Press back to return the Modify communicating device settings screen.
HP XP19−060−230−06 5809K00015
AIR HANDLER CBX32MV−60 5809K00020
Equipment
Name
Electric Heating Airflow
Low Cooling
Airflow
Low Cooling
Airflow
Figure 14. Reset device confirmation note
At this point press next step to advance to the test controls.
Page 11 | icomfortt Touch Screen 7−Day Programmable Thermostat |
