Lenovo 3444CUU manual Security menu items, External Internal If External Internal is selected

Table 4. Config menu items (continued)

Submenu item	Selection		Comments
CIRA Timeout	0-255		Set timeout option for CIRA
			connection to be established. 1
			though 254 seconds are selectable.
			If you select “0,” use 60 seconds as
			default timeout value.
			If you select “255,” waiting time for
			establishing a connection is unlimited.
Console Type	•	PC-ANSI	Select the console type for AMT.
	•	VT100+	Note: This console type should
	•	VT-UTF8
			match the Intel AMT remote console.

Security menu items

Table 5. Security menu items

Submenu item	Selection		Comments
Password: Refer to Security menu and Using passwords.
Fingerprint
Predesktop Authentication	•	Disabled	Enable or disable fingerprint
	•	Enabled	authentication before the operating
			system is loaded.
Reader Priority	•	External ➙ Internal	If External ➙ Internal is selected,
	•	Internal Only	an external fingerprint reader is used
			if attached. Otherwise, an internal
			fingerprint reader is used. If Internal
			Only is selected, an internal fingerprint
			reader is used.
Security Mode	•	Normal	If fingerprint authentication fails,
	•	High	you can still start the computer by
			entering a password. If you have
			selected “Normal,” enter a power-on
			password or a supervisor password;
			if you have selected “High,” enter a
			supervisor password.
Password Authentication	•	Disabled	Enable or disable password
	•	Enabled	authentication. If high security mode
			is selected, this item appears.
Reset Fingerprint Data	•	Enter	This option is used to erase all
			fingerprint data stored in the
			fingerprint reader and reset settings
			to the factory state (ex. Power-on
			security, LEDs, etc.) As a result, any
			power-on security features previously
			enabled will not be able to work until
			they are re-enabled in the fingerprint
			software.
Security Chip

110User Guide