6.Remove the screw 1 , and then pivot the
Figure 16. Removing the hard-disk-drive bracket with the hard disk drive
7.Disconnect the cable from the hard disk drive.
8.Remove the three screws that secure the hard disk drive to the bracket, and then remove the hard disk drive from the bracket. Do not touch the circuit board on the bottom of the hard disk drive.
Figure 17. Removing the hard disk drive from the bracket
9.To install the new hard disk drive, position the new hard disk drive in the
10.Connect the
11.Position the bracket with the new hard disk drive in the chassis so that the screw hole in the bracket aligns with the corresponding hole in the chassis. Then, install the screw to secure the bracket with the hard disk drive to the chassis.
Chapter 9. Replacing FRUs 81