Lenovo E73Z, 10BL manual First device network, Second device hard disk

Message/Symptom	FRU/Action
Incorrect memory size during POST	1. Run the Memory tests.
	2.	Memory Module
	3.	System Board
"Insert a Diskette" icon appears with a known-good	1. System Board
diagnostics diskette in the first 3.5-inch diskette drive.	2.	Diskette Drive Cable
	3.	Network Adapter
Intensity or color varies from left to right of characters	1.	Display
and color bars	2.	Video adapter (if present)
	3.	System Board
No power or fan not running	1. See “Hard disk drive boot error” on page 59.
Non-system disk or disk error-type message with a	1. Diskette Drive
known-good diagnostic diskette.	2.	System Board
	3.	Diskette Drive Cable
Other display symptoms not listed above (including blank	1. Display
or illegible display)	2.	System Board
Power-on indicator or hard disk drive in-use light not on,	1. Power switch/LED assembly
but computer works correctly	2.	System Board
Printer problems	1.	Printer
	2.	System Board
Program loads from the hard disk with a known-good	1. Run the Setup Utility program and check Startup
diagnostics diskette in the first 3.5-inch diskette drive		sequence.
	2.	Diskette Drive
	3.	Diskette Drive Cable
	4.	System Board
	5.	Power Supply
RPL computer cannot access programs from its own hard	1. If network administrator is using LCCM Hybrid RPL,
disk.		check startup sequence:
		a. First device - network
		b. Second device - hard disk
	2.	Hard disk drive
RPL computer does not RPL from server	1. Check startup sequence.
	2.	Check the network adapter LED status.
Serial or parallel port device failure (system board port)	1. External Device Self-Test OK?
	2.	External Device
	3.	Cable
	4.	System Board

62ThinkCentre E73z Hardware Maintenance Manual