For some countries or regions, a telephone line adapter is included in th e box. Use this adapter to connect an answering
machine, telephone, or other telecommunications equipment to the printer.
1Connect one end of the telephone cable that came with the printer to the p rinter LINE port
2Connect the other end of the telephone cable to the adapter, and then connect the adapter to the active telephone
wall jack.
Note: Your telephone adapter may look different than the one shown. It will fit t he wall jack used in your
location.
Setting the outgoing fax or station name and number
1Type the printer IP address into the address field of your Web browse r.
If you do not know the IP address of the printer, you can:
View the IP address on the printer control panel in the TCP/IP section under the Ne tworks/Ports menu.
Print a network setup page or the menu settings pages a nd locate the IP address in the TCP/IP section.
2Click Settings > Fax Settings > Analog Fax Setup.
3In the Fax Name or Station Name field, enter the name to be printed on all outgoing faxes.
4In the Fax Number or Station Number field, enter the printer fax number.
5Click Submit.
Setting the date and time
You can set the date and time so that they are printed on every fax you s end. If there is a power failure, then you may
have to reset the date and time.
1Type the printer IP address in the address field of your Web browser.
If you do not know the IP address of the printer, then you can:
View the IP address on the printer control panel in the TCP/IP section under the Ne tworks/Ports menu.
Print a network setup page or the menu settings pages a nd locate the IP address in the TCP/IP section.
2Click Security > Set Date and Time.
Faxing 119