4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Input config error
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Check if all tray configurations are correct. Remove unnecessary trays if needed.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
59 Incompatible output bin [x]
Try one or more of the following:
Remove the specified output bin.
Touch Continue to clear the message and continue printing without using the specified o utput bin.
61 Remove defective disk
Try one or more of the following:
Remove the defective printer hard disk.
Install a different printer hard disk before performing any op erations that require a printer hard disk.
62 Disk full
Try one or more of the following:
Touch Continue to clear the message and continue processing.
Delete fonts, macros, and other data stored on the p rinter hard disk.
Install a printer hard disk with larger capacity.
80.xx Fuser near life warning
1Order a replacement fuser immediately.
2When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement
part.
3Touch Continue to clear the message and continue printing.
80.xx Fuser life warning
Order a replacement fuser immediately. When print quality is reduce d, install the new fuser, following the
instruction sheet that came with the replacement part.
Touch Continue to clear the message and continue printing.
Troubleshooting 275