Administrative support

Finding advanced networking and administrator information

This chapter covers basic administrative support tasks using the Em bedded Web Server. For more advanced system
support tasks, see the Networking Guide on the Software and Documentation CD or the Embedded Web Server
Administrator's Guide on the Lexmark Web site at http://support.lexmark.com.

Using the Embedded Web Server

If the printer is installed on a network, then the Embedded Web Server is available for a range of functions including:
Viewing a virtual display of the printer control panel
Checking the status of the printer supplies
Configuring printer settings
Configuring network settings
Viewing reports
To access the Embedded Web Server for your printer:
1Type the printer IP address into the address field of your Web browse r.
Notes:
If you do not know the IP address of the printer, then print a network setup page, and then locate the IP
address in the TCP/IP section.
If you are using a proxy server, then temporarily disable it to load the Embedded Web Server correctly.
2Press Enter.

Checking the virtual display

1Open an Embedded Web Server associated with your printer.
Type the printer IP address into the address field of your Web browse r.
If you do not know the IP address of the printer, you can:
View the IP address on the printer control panel in the TCP/IP section under the Ne tworks/Ports menu.
Print a network setup page or the menu settings pages a nd locate the IP address in the TCP/IP section.
2Check the virtual display that appears in the top left corner of the screen.
The virtual display works as an actual display would work on a printer control panel, showing printer messages.

Checking the status of the printer

1Type the printer IP address into the address field of your Web browse r.
Administrative support 246