Menu item Description
Portrait Height
3–48 inches
76–1219 mm
Sets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. 356 mm is the
international factory default setting.
The height can be increased in 0.01inch or in 1mm increments.
Feed Direction
Short Edge
Long Edge
Specifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears only if the longest edge is shorter than the
maximum width supported in the tray.
Bin Setup menu
Menu item Description
Output Bin
Standard Bin
Bin [x]
Specifies the default exit bin
Note: Standard Bin is the factory default setting.
Configure Bins
Mailbox
Link
Mail Overflow
Link Optional
Type Assignment
Specifies configuration options for exit bins
Notes:
Mailbox is the factory default setting. This setting
treats each bin as a separate mailbox.
Link configures all available bins as one large exit bin.
Mail Overflow assigns an overflow bin when the
mailbox bins become full.
Link Optional links together all available exit bins
except the standard bin and only appears when at
least two optional bins are installed.
Type Assignment assigns each paper type to an exit
bin or linked bin set.
Bins assigned the same name are automatically
linked unless Link Optional is selected.
Overflow Bin
Standard Bin
Bin [x]
Specifies an alternate exit bin when a designated bin is full
Note: Standard Bin is the factory default setting.
Understanding printer menus 152