Supported flash drives and file types

Flash drive File type
Lexar JumpDrive 2.0 Pro (256MB, 512MB, or 1GB sizes)
SanDisk Cruzer Mini (256MB, 512MB, or 1GB sizes)
Notes:
HiSpeed USB flash drives must support the FullSpeed standard. Devices supporting only USB
lowspeed capabilities are not supported.
USB flash drives must support the FAT (File Allocation Tables) system. Devices formatted with NTFS
(New Technology File System) or any other file system are not supported.
Documents:
.pdf
.xps
Images:
.dcx
.gif
.JPEG
.jpg
.bmp
.pcx
.TIFF
.tif
.png
Printing on specialty media

Tips on using letterhead

Use letterhead designed specifically for laser printers.
Print samples on the letterhead being considered for use befor e buying large quantities.
Before loading letterhead, flex the sheets to prevent them from sticking together.
Observe proper page orientation.
Source Print side Paper orientation
Standard 550sheet tray
Optional 550sheet tray
Optional 2000sheet
highcapacity feeder
Preprinted letterhead design is placed
faceup.
The top edge of the sheet with the logo is
placed at the left side of the tray.
Duplex (twosided) printing
from trays
Preprinted letterhead design is placed
facedown.
The top edge of the sheet with the logo is
placed at the right side of the tray.
Multipurpose feeder (simplex
printing)
Preprinted letterhead design is placed
facedown.
The top edge of the sheet with the logo
should enter the multipur pose feeder
first.
Multipurpose feeder (duplex
printing)
Preprinted letterhead design is placed
faceup.
The top edge of the sheet with the logo
should enter the multipurpose feeder last.
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable
for laser printers.
Printing 90