Lexmark 90T7005, Pro700 Series manual Installing the printer on an Ethernet network, 108

In the Search field, type sharing the printer on a network, and then press return.

gClick OK.

hClick Close on the Printer Ports dialog.

iMake sure the new port is selected on the Ports tab, and then click Apply. The new port is listed with the printer name.

jClick OK.

Sharing a printer in a Macintosh environment

1From the Apple menu, choose System Preferences.

2From the menu bar, click Help  System Preferences Help.

3

4To let other Macintosh computers on the network that use Mac OS X version 10.3 or later use any printer connected to your Macintosh computer, double-click Sharing your printer with Mac OS X users.

or

To let Windows computers on the network use any printer connected to your Macintosh computer, double-click Sharing your printers with Windows users.

5Follow the instructions on the computer screen.

Note: Windows users should see the Windows documentation for information on adding a network printer connected to a Macintosh computer.

Installing the printer on an Ethernet network

Information you will need to set up the printer on an Ethernet network

To configure your printer for an Ethernet network, organize the following information before you begin:

Note: If your network automatically assigns IP addresses to computers and printers, continue on to installing the printer.

•A valid, unique IP address for the printer to use on the network

•The network gateway

•The network mask

•A nickname for the printer (optional)

Note: A printer nickname can make it easier for you to identify your printer on the network. You can choose to use the default printer nickname, or assign a name that is easier for you to remember.

You will need an Ethernet cable to connect the printer to the network and an available port where the printer can physically connect to the network. Use a new network cable when possible to avoid potential problems caused by a damaged cable.

Networking

108