Lexmark Pro700 Series, 90T7005 manual Printing photos from a PictBridge-enabled digital camera

Models: 90T7005 Pro700 Series

1 185
Download 185 pages 15.54 Kb
Page 45
Image 45

Printing photos from a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without using a computer.

1Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with the camera.

2Insert the other end of the cable into the PictBridge port on the front of the printer.

Notes:

Make sure that the digital camera is set to the correct USB mode. If the camera USB selection is incorrect, then the camera is detected as a flash drive, or an error message is displayed on the printer control panel. For more information, see the camera documentation.

The printer reads only one memory device at a time.

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory card. A loss of data can occur.

3If the PictBridge connection is successful, then the following message appears on the display: Use Camera to choose and print photos. Press OK to select printer default settings.

Printing

45

Page 45
Image 45
Lexmark Pro700 Series, 90T7005 manual Printing photos from a PictBridge-enabled digital camera