![](/images/new-backgrounds/1105206/105206217x1.webp)
Installing the printer on an Ethernet network
Before you install the printer on an Ethernet network, make sure that:
•You have completed the initial setup of the printer.
•Your network is set up and working properly.
•Your computer is connected to your network.
For Windows users
1Close all open software programs.
2Insert the installation software CD.
If the Welcome screen does not appear after a minute, do one of the following: a Click , or click Start and then click Run.
b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
3Follow the instructions on the computer screen to set up the printer, selecting Ethernet connection when you are prompted to select a connection type.
For Macintosh users
1Close all open software applications.
2Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3
4Follow the instructions on the computer screen to set up the printer, selecting Ethernet connection when you are prompted to select a connection type.
Networking FAQ
What is Wi-Fi Protected Setup?
We support the following methods in adding new wireless network devices:
•Personal Identification Number
•Push Button Configuration
Look for any of these identifier marks to check if your device is WPS certified:
Networking