Lexmark C780, C782 manual Linking output bins, Holding a job in the printer, Value Description

Printing

Linking output bins

If you attach an optional finisher or mailbox to your printer, you can link output bins, or otherwise specify how the printer sends jobs to the bins, by changing the Configure Bins settings in the Paper Menu.

Value	Description
Mailbox*	Lets you select an output bin when you send a job to print. (If you prefer, you can select a
	default output bin for all print jobs to go to.) The printer alerts you when the bin you selected
	becomes full, and stops printing until you empty the bin.
Link	Links all available bins so that when one bin becomes full, the printer sends jobs to the next
	linked bin.
Mail Overflow*	Sends jobs automatically to a preassigned overflow bin when the current bin becomes full.
Link Optional	Configures the printer to treat all the optional bins as one large output bin and treat the stan-
	dard bin as an individually addressable bin.
Type Assignment	Lets you assign different types of media to specific output bins or a set of linked bins. The
	printer then sends all printed media to the bin or set of linked bins that you designated to
	receive each type of paper or specialty media.

* Only available if you have attached an optional mailbox.

To change the Configure Bins setting:

1Press until you see Paper Menu.

2Press

3Press until you see Bin Setup

4Press

5Press until you see Configure Bins, and then press . Mailbox appears on the second line of the display.

6Press until you see the value you want, and then press to save the value as the bin configuration default.

7Press until you get to the Ready state.

Holding a job in the printer

When sending a job to the printer, you can specify in the driver that you want the printer to hold the job in memory. When you are ready to print the job, you must go to the printer and use the operator panel menus to identify which held job you want to print.

Note: Print and Hold functions require a minimum of 128MB available printer memory. We recommend a minimum of 256MB available printer memory and a hard disk.

Printing and deleting held jobs

Once held jobs are stored in printer memory, you can use the printer operator panel to specify what you want to do with one or more of the jobs. You can select either Confidential Job or Held Jobs (Repeat Print, Reserve Print, and Verify Print jobs) from the Job Menu. If you select Confidential Job, you must enter the personal identification number (PIN) you specified in the driver when you sent the job. For more information, see Printing confidential jobs.

Linking output bins

41