Lexmark C780, C782 manual Installing a memory card

Installing and removing options

Installing a memory card

Follow the instructions in this section to install a printer memory card. Memory cards must have 100-pin connectors.

Note: Memory cards designed for other Lexmark printers may not work with your printer.

1 Remove the system board access cover. For more information, see Removing the system board access cover.

Warning: Memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card.

2Unpack the memory card.

Avoid touching the connection points along the edge of the card. Save the packaging.

Latch

Memory card connector

Notch

Connection points

3Push open the latches on both ends of the memory connector.

4Align the notches on the bottom of the card with the notches on the connector.

5Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card.

6Make sure each latch fits over the notch on the end of the card.

Installing memory and option cards

16