Media specifications
•Remove a 3 mm (0.125 in.) strip from the leading edge to prevent labels from peeling inside the printer.
•Portrait orientation is preferred, especially when printing bar codes.
•Do not use labels that have exposed adhesive.
Card stock
Card stock is single ply, and has a large array of properties, such as the moisture content, thickness, and texture, that can significantly affect print quality. For more information on the preferred weight for the grain direction of media, see Identifying media sources and specifications.
Try a sample of any card stock considered for use with the printer before purchasing a large quantity. For more information on the preferred weight of media, see Media types and weights (output options). When printing on card stock:
•Set the Paper Type menu item in the Paper Menu to Card Stock from the operator panel, the printer driver, or from MarkVision Professional. Set the Paper Weight to CardStock Weight, and select the CardStock Weight as Normal or Heavy for the value. Set this from the operator panel, the printer driver, or from MarkVision Professional. Use Heavy for card stock weighing more than or heavier than 163 g/m2 (90 lb).
•Be aware that preprinting, perforation, and creasing can significantly affect the print quality and cause media handling or jamming problems.
•Avoid using card stock that may release hazardous emissions when heated.
•Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces
•The use of grain long card stock is recommended.
Storing media
Use the following guidelines for proper media storage. These help avoid media feeding problems and uneven print quality:
•For best results, store media in an environment where the temperature is approximately 21°C (70°F) and the relative humidity is 40%. Most label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with a relative humidity of 40 to 60%.
•Store cartons of media on a pallet or shelf, rather than directly on the floor.
•When storing individual packages of media out of the original carton, make sure they rest on a flat surface so the edges do not buckle or curl.
Do not place anything on top of the media packages.
Storing media
53
