MFP Adjustable stand setup
Installing the finisher or mailbox
1Remove the top cover from the printer.
You will not need the cover when the finisher or mailbox is attached. Store the cover; it will be needed if you remove the finisher or mailbox.
2Align and insert the finisher or mailbox into the slots on top of the printer.
Due to the small amount of space between the printer and top shelf, the finisher or mailbox must be rotated into the slots.
3Make sure the finisher or mailbox is positioned securely.
4Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward. The wire bail came with the printer and rests in the standard output bin when installed.
5Attach the plastic bracket to the finisher or mailbox.
Installing the finisher or mailbox
16
