![](/images/new-backgrounds/1169753/16975339x1.webp)
Low profile stand setup
Installing a 250- or 500-sheet drawer
The 250- or
A drawer consists of a tray and a support unit. The 250- and the
1Remove the tray from the support unit. Remove all packing material and tape from the support unit and the tray.
2Place the tray in the support unit.
3Place the support unit on the stand.
You can attach a label to the tray to indicate the tray number.
Labels
4If you have additional drawers, place them on top of any installed drawer.
The tab, round peg, and square hole on top of any drawer help you position the duplex unit so the edges are aligned properly. Make sure it is securely in place.
Tab
Square hole
Round peg
Installing a 250- or
19