Scanner setup
Unlocking the scanner
1Locate the lock switch on the side of the scanner, and then slide the switch down.
2Lift the scanner feed tray up until it locks into position.
Attaching cables and power cords
1Connect the scanner cable to the scanner and printer.
2Connect the printer to a LAN drop or hub using standard cabling that is compatible with your network.
3Connect the
Note: Germany: Use only the German TAE type F adapter shipped with this product, because it contains a billing tone filter. The adapter is designed only for the F connector of the German wall outlet. This must be the only device attached to the NFN wall receptacle.
Switzerland: Use only the Swiss adapter shipped with this product, because it contains a billing tone filter.
4If you received a telephone adapter specifically designed for use in your country or region, attach the telephone adapter to the telephone fax line cable, and plug the fax line cable into the phone line outlet.
To connect a telephone to the MFP, plug the telephone into the right modem port on the back of the scanner.
Step 1 | Step 2 | Step 3 |
Unlocking the scanner
43
