Scanner stand setup
Installing output options
If you purchased an output option (finisher, expander, or mailbox), follow these steps:
1Remove the top cover from the printer.
You will not need the cover when the output option is attached. Store the cover; it will be needed if you remove the output option.
2Remove the option from the box, and follow the setup instructions included with the option.
3Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward. The wire bail came with the printer and rests in the standard output bin when installed.
4Attach the plastic bracket to the finisher, expander, or mailbox.
5Go to Removing the print cartridge packaging on page 32.
Go to page 32
Installing output options
29
