Lexmark T64X setup guide

Getting started

Customizing your MFP option

You can customize your MFP with various input, output, and memory options.

Note: Leave all components and hardware in the boxes until you are ready to install them.

Check the boxes you received to make sure you have all the necessary components for the configuration you ordered.

Install the printer and any options you have purchased in the following order:

CAUTION: If you are installing options after setting up the printer, turn the printer off, and unplug the power cord from the wall outlet before continuing.

1Scanner stand, furniture stand, or caster base

22000-sheet drawer

3250-sheet or 500-sheet drawer

4Duplex unit

5Printer

6Scanner shelf or output options

7MFP option (scanner)

The following options are available for your MFP.

Note: Additional options may be available for your MFP.

Input options	Output options	Other options
250-sheet drawer	Output expander	Duplex unit
500-sheet drawer	5-bin mailbox	Spacer
2000-sheet drawer (letter/A4)	High capacity output stacker	Scanner shelf
250-Sheet Universally Attached Tray with Drawer	StapleSmart™ finisher	Caster base
400-Sheet Universally Attached Tray with Drawer		Scanner stand
Envelope feeder		Furniture stand

CAUTION: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or caster base if you are using a 2000-sheet drawer. Certain other configurations also must have a printer stand or caster base. More information is available on our Lexmark Web site at www.lexmark.com/multifunctionprinters.

Customizing your MFP option

10