LG Electronics 3 owner manual Editing Text

12Using LG EzSign 3.0 Editor

Editing Text

Click a text area to edit the text inside the area. You can also use the text properties edit pop-up win- dow, which appears when you click a text area, to change the properties of the selected text area.

When a text area is selected, the properties editing pop-up window illustrated below appears. The following properties can be changed.

ꔈꔈ Bold

ꔈꔈ Underline ꔈꔈ Italic

ꔈꔈ Color

ꔈꔈ Font Size ꔈꔈ Font

ꔈꔈ Text direction

(left to right/right to left) ꔈꔈ Alignment

(left/center/right) ꔈꔈ Text flow

(None/Slow/Normal/Fast)

Note

ꔈꔈ For the font area, the input length may vary depending on the font size.

ꔈꔈ If the text entered exceeds the maximum num- ber of characters available for the input box and the Flow Speed function is not enabled, the text will be cut off when the content is displayed on TV.

ꔈꔈ You can type only a limited amount of text. (Up to 2700 pixels). If the text you enter exceeds the maximum length, the input of text will be limited.

ꔈꔈ The following elements affect the text length.

Number of characters, font size, font type, and bold/italic properties

ꔈꔈ When a font is installed on the system, it is also added to the Editor and displayed in the font list. We recommend installing general TTF (True Type Font). The fonts must be installed on the PC where the EzSign Editor has been installed.

ꔈꔈ Some characters may not be entered, or may be entered but not displayed as normal on the screen depending on the font type or system installation environment.

Please use the Preview function to see how the characters will appear on the TV screen.

ꔈꔈ Once the text direction is set, the text flow direction is determined accordingly. When the direction is set from left to right, the text flows to the right, whereas the text flows to the left when the opposite direction is selected.

ꔈꔈ If you use the same color as the panel saver content text font, image-sticking may occur on the panel. Therefore, we recommend using a different color.

ꔈꔈ When Text Flow property is applied to a text, its content is applied uniformly to all slides.

ꔈꔈ Editing for the selected text area is applied to the slide below when:

exiting the text edit mode, manually entering the font size, changing the font type, and setting the flow property.

ꔈꔈ After editing the text, you can use Preview to check how the content is displayed on the TV.