Manuals
/
Liebherr
/
Kitchen Appliance
/
Refrigerator
Liebherr
RI 1410/ RBI 1410/ FI 1051 manual Door swing clearance, 110, hinges on right
Models:
RI 1410/ RBI 1410/ FI 1051
1
11
34
34
Download
34 pages
36.52 Kb
8
9
10
11
12
13
14
15
<
>
Install
Dimension
Connecting the appliance
Setting up the appliance
Adjusting the door opening angle
Page 11
Image 11
Door swing clearance
Fig. 12 110°, hinges on right
11
Page 10
Page 12
Page 11
Image 11
Page 10
Page 12
Contents
RI 1410/ RBI 1410/ FI
Installation Instructions
Refrigerators and freezers, built-in
2 Setting up the appliance
General safety information
Contents
1 General safety information
Setting up the appliance
Fig. 1 Single-unit installation
Planning information 3 Planning information
Measurements that are marked with A depend on the handle used
Planning information
Planning information
Fig. 4 Side-by-side installation SBS24I3 with 80” or 84” ventilation grille
5 Air circulation in the kitchen cabinet
Cabinet Opening Dimensions 4 Cabinet Opening Dimensions
6 Door swing clearance
Door swing clearance
Fig. 10 110, hinges on left
Door swing clearance
Fig. 11 90, hinges on left
Door swing clearance
Fig. 12 110, hinges on right
Door swing clearance
Fig. 13 90, hinges on right
Door swing clearance
Screws for door frames
Fitting décor panels
7 Fitting décor panels
7.1 Fitting décor panels
u an edge must be routed around the panel to ensure a proper fit
7.2 Décor panel dimensions - Framed panels
Fitting décor panels
If the thickness of the custom panels is less than 1/4 in 6.4 mm
Overlay panel Spacer panel Backer panel
Overlay Panel
3 Backer Panel
Spacer Panel
Fitting décor panels
7.3 Side-by-side installation
Backer panel
FI 1051, RBI 1410, RI
Overlay panel
Spacer panel
Spacer panel
Fitting décor panels
Overlay panel
3 Backer panel
1061
Changing the door hinges
8 Changing the door hinges
7.3 Cut-out for glass window WFI
Fig. 30 u Push panel forward over the damper bracket Fig
8.2 Remove soft stop unit bottom
8.3 Remove door
Changing the door hinges
Changing the door hinges
8.5 Swapping the clip-on frame
8.4 Swapping bearing parts
8.6 Fitting the door
Fig. 36 u Loosen cover Fig. 36 9 from the panel Fig. 36 1 and
8.7 Fitting the soft stop mechanism bottom
8.8 Fitting soft stop mechanism top
Changing the door hinges
Removing the soft stop unit u Open the door
Adjusting the door opening angle
9 Adjusting the door opening angle
8.9 Aligning the door
MPa bars
Water connection
10 Water connection
Water pressure
11 Anti-tip device
12 Single unit installation
Fit side installation strip
Anti-tip device
Install the appliance in the recess
Single unit installation
Install end strip
Secure side installation strips
u Insert water filter see 14 .* If no water filter is used
u Fit décor panels see Fit handles framed panel
Fit handles overlay panel
Single unit installation
Fit side installation strips
Side-by-side installation 13 Side-by-side installation
Join appliances
Side-by-side installation
Side-by-side installation
Fit upper ventilation grille 80” or 84”
Install the appliance in the recess
Secure side installation strip
Fit end strip
Side-by-side installation
Fig. 74 Handles from the manufacturer Ø 3/4” 18 mm
Side-by-side installation
u Fit décor panels see Fit handles framed panel
Fit handles overlay panel
15 Connecting the appliance
Installing the water filter
14 Installing the water filter
Connecting the appliance