Manuals / Liebherr / Kitchen Appliance / Refrigerator

Liebherr RI 1410/ RBI 1410/ FI 1051 FI 1051, RBI 1410, RI, Overlay panel, Spacer panel, Width - W

Models: RI 1410/ RBI 1410/ FI 1051

1 34

Page 17

Fitting décor panels

1 Overlay panel		2 Spacer panel			Fig. 21
1 Overlay panel		2 Spacer panel			3 Backer panel
FI 1051, RBI 1410, RI 1410	Width - W		Height - H		Thickness of panel

Overlay panel (1)	23	5/16” (592.1 mm)	72	1/4” (1835.2 mm)	3/4” (19 mm)

Spacer panel (2)	21	1/4” (539.8 mm)	70	1/16” (1779.6 mm)	3/32” (2.5 mm)

Backer panel (3)	22	3/4” (577.9 mm)	71	9/16” (1817.7 mm)	1/4” (6.4 mm)

Page 17

Image 17

Liebherr RI 1410/ RBI 1410/ FI 1051 FI 1051, RBI 1410, RI, Overlay panel, Spacer panel, Backer panel, Fitting décor panels

Contents

RI 1410/ RBI 1410/ FI Installation InstructionsRefrigerators and freezers, built-in Contents General safety information1 General safety information 2 Setting up the applianceSetting up the appliance Fig. 1 Single-unit installation Planning information 3 Planning informationMeasurements that are marked with A depend on the handle used Planning informationPlanning information Fig. 4 Side-by-side installation SBS24I3 with 80” or 84” ventilation grille5 Air circulation in the kitchen cabinet Cabinet Opening Dimensions 4 Cabinet Opening Dimensions6 Door swing clearance Door swing clearanceFig. 10 110, hinges on left Door swing clearanceFig. 11 90, hinges on left Door swing clearanceFig. 12 110, hinges on right Door swing clearanceFig. 13 90, hinges on right Door swing clearance7 Fitting décor panels Fitting décor panels7.1 Fitting décor panels Screws for door framesFitting décor panels 7.2 Décor panel dimensions - Framed panelsIf the thickness of the custom panels is less than 1/4 in 6.4 mm u an edge must be routed around the panel to ensure a proper fit3 Backer Panel Overlay PanelSpacer Panel Overlay panel Spacer panel Backer panelFitting décor panels 7.3 Side-by-side installationOverlay panel FI 1051, RBI 1410, RISpacer panel Backer panelOverlay panel Fitting décor panels3 Backer panel Spacer panel8 Changing the door hinges Changing the door hinges7.3 Cut-out for glass window WFI 10618.3 Remove door 8.2 Remove soft stop unit bottomChanging the door hinges Fig. 30 u Push panel forward over the damper bracket Fig8.4 Swapping bearing parts 8.5 Swapping the clip-on frame8.6 Fitting the door Changing the door hinges8.8 Fitting soft stop mechanism top 8.7 Fitting the soft stop mechanism bottomChanging the door hinges Fig. 36 u Loosen cover Fig. 36 9 from the panel Fig. 36 1 and9 Adjusting the door opening angle Adjusting the door opening angle8.9 Aligning the door Removing the soft stop unit u Open the door10 Water connection Water connectionWater pressure MPa barsFit side installation strip 12 Single unit installationAnti-tip device 11 Anti-tip deviceInstall end strip Single unit installationSecure side installation strips Install the appliance in the recessFit handles overlay panel u Fit décor panels see Fit handles framed panelSingle unit installation u Insert water filter see 14 .* If no water filter is usedFit side installation strips Side-by-side installation 13 Side-by-side installationJoin appliances Side-by-side installationSide-by-side installation Fit upper ventilation grille 80” or 84”Fit end strip Secure side installation stripSide-by-side installation Install the appliance in the recessu Fit décor panels see Fit handles framed panel Side-by-side installationFit handles overlay panel Fig. 74 Handles from the manufacturer Ø 3/4” 18 mm15 Connecting the appliance Installing the water filter14 Installing the water filter Connecting the appliance

FI 1051, RBI 1410, RI 1410

Overlay panel (1)

5/16” (592.1 mm)

1/4” (1835.2 mm)

3/4” (19 mm)

Spacer panel (2)

1/4” (539.8 mm)

1/16” (1779.6 mm)

3/32” (2.5 mm)

Backer panel (3)

3/4” (577.9 mm)

9/16” (1817.7 mm)

1/4” (6.4 mm)