Manuals / Liebherr / Kitchen Appliance / Refrigerator

Liebherr RI 1410/ RBI 1410/ FI 1051 manual Side-by-side installation, Fitting décor panels

Models: RI 1410/ RBI 1410/ FI 1051

1 34

Download 34 pages 36.52 Kb

Page 16

Image 16

Fitting décor panels

7.3 Side-by-side installation

Fig. 20 Front view		3	Backer panel	B only for FI 1051
1	Overlay panel
2	Spacer panel	A	Cut-out only for WFI 1061

Page 16

Image 16

Liebherr RI 1410/ RBI 1410/ FI 1051 manual Side-by-side installation, Fitting décor panels

Contents

Refrigerators and freezers, built-in Installation InstructionsRI 1410/ RBI 1410/ FI General safety information Contents1 General safety information 2 Setting up the applianceSetting up the appliance Planning information 3 Planning information Fig. 1 Single-unit installationPlanning information Measurements that are marked with A depend on the handle usedFig. 4 Side-by-side installation SBS24I3 with 80” or 84” ventilation grille Planning informationCabinet Opening Dimensions 4 Cabinet Opening Dimensions 5 Air circulation in the kitchen cabinetDoor swing clearance 6 Door swing clearanceDoor swing clearance Fig. 10 110, hinges on leftDoor swing clearance Fig. 11 90, hinges on leftDoor swing clearance Fig. 12 110, hinges on rightDoor swing clearance Fig. 13 90, hinges on rightFitting décor panels 7 Fitting décor panels7.1 Fitting décor panels Screws for door frames7.2 Décor panel dimensions - Framed panels Fitting décor panelsIf the thickness of the custom panels is less than 1/4 in 6.4 mm u an edge must be routed around the panel to ensure a proper fitOverlay Panel 3 Backer PanelSpacer Panel Overlay panel Spacer panel Backer panel7.3 Side-by-side installation Fitting décor panelsFI 1051, RBI 1410, RI Overlay panelSpacer panel Backer panelFitting décor panels Overlay panel3 Backer panel Spacer panelChanging the door hinges 8 Changing the door hinges7.3 Cut-out for glass window WFI 10618.2 Remove soft stop unit bottom 8.3 Remove doorChanging the door hinges Fig. 30 u Push panel forward over the damper bracket Fig8.5 Swapping the clip-on frame 8.4 Swapping bearing parts8.6 Fitting the door Changing the door hinges8.7 Fitting the soft stop mechanism bottom 8.8 Fitting soft stop mechanism topChanging the door hinges Fig. 36 u Loosen cover Fig. 36 9 from the panel Fig. 36 1 andAdjusting the door opening angle 9 Adjusting the door opening angle8.9 Aligning the door Removing the soft stop unit u Open the doorWater connection 10 Water connectionWater pressure MPa bars12 Single unit installation Fit side installation stripAnti-tip device 11 Anti-tip deviceSingle unit installation Install end stripSecure side installation strips Install the appliance in the recessu Fit décor panels see Fit handles framed panel Fit handles overlay panelSingle unit installation u Insert water filter see 14 .* If no water filter is usedSide-by-side installation 13 Side-by-side installation Fit side installation stripsSide-by-side installation Join appliancesFit upper ventilation grille 80” or 84” Side-by-side installationSecure side installation strip Fit end stripSide-by-side installation Install the appliance in the recessSide-by-side installation u Fit décor panels see Fit handles framed panelFit handles overlay panel Fig. 74 Handles from the manufacturer Ø 3/4” 18 mm14 Installing the water filter Installing the water filter15 Connecting the appliance Connecting the appliance