Manuals / Liebherr / Kitchen Appliance / Refrigerator

Liebherr RI 1410/ RBI 1410/ FI 1051 manual Planning information

Models: RI 1410/ RBI 1410/ FI 1051

1 34

Download 34 pages 36.52 Kb

Page 6

Image 6

Planning information

Fig. 4 Side-by-side installation: SBS24I3 with 80” or 84” ventilation grille

Fig. 5 Side-by-side installation: SBS24I1 and SBS24I6 with 80” or 84” ventilation grille

Page 6

Image 6

Liebherr RI 1410/ RBI 1410/ FI 1051 manual Planning information

Contents

Installation Instructions Refrigerators and freezers, built-inRI 1410/ RBI 1410/ FI 1 General safety information General safety informationContents 2 Setting up the applianceSetting up the appliance Planning information 3 Planning information Fig. 1 Single-unit installationPlanning information Measurements that are marked with A depend on the handle usedFig. 4 Side-by-side installation SBS24I3 with 80” or 84” ventilation grille Planning informationCabinet Opening Dimensions 4 Cabinet Opening Dimensions 5 Air circulation in the kitchen cabinetDoor swing clearance 6 Door swing clearanceDoor swing clearance Fig. 10 110, hinges on leftDoor swing clearance Fig. 11 90, hinges on leftDoor swing clearance Fig. 12 110, hinges on rightDoor swing clearance Fig. 13 90, hinges on right7.1 Fitting décor panels Fitting décor panels7 Fitting décor panels Screws for door framesIf the thickness of the custom panels is less than 1/4 in 6.4 mm 7.2 Décor panel dimensions - Framed panelsFitting décor panels u an edge must be routed around the panel to ensure a proper fitSpacer Panel Overlay Panel3 Backer Panel Overlay panel Spacer panel Backer panel7.3 Side-by-side installation Fitting décor panelsSpacer panel FI 1051, RBI 1410, RIOverlay panel Backer panel3 Backer panel Fitting décor panelsOverlay panel Spacer panel7.3 Cut-out for glass window WFI Changing the door hinges8 Changing the door hinges 1061Changing the door hinges 8.2 Remove soft stop unit bottom8.3 Remove door Fig. 30 u Push panel forward over the damper bracket Fig8.6 Fitting the door 8.5 Swapping the clip-on frame8.4 Swapping bearing parts Changing the door hingesChanging the door hinges 8.7 Fitting the soft stop mechanism bottom8.8 Fitting soft stop mechanism top Fig. 36 u Loosen cover Fig. 36 9 from the panel Fig. 36 1 and8.9 Aligning the door Adjusting the door opening angle9 Adjusting the door opening angle Removing the soft stop unit u Open the doorWater pressure Water connection10 Water connection MPa barsAnti-tip device 12 Single unit installationFit side installation strip 11 Anti-tip deviceSecure side installation strips Single unit installationInstall end strip Install the appliance in the recessSingle unit installation u Fit décor panels see Fit handles framed panelFit handles overlay panel u Insert water filter see 14 .* If no water filter is usedSide-by-side installation 13 Side-by-side installation Fit side installation stripsSide-by-side installation Join appliancesFit upper ventilation grille 80” or 84” Side-by-side installationSide-by-side installation Secure side installation stripFit end strip Install the appliance in the recessFit handles overlay panel Side-by-side installationu Fit décor panels see Fit handles framed panel Fig. 74 Handles from the manufacturer Ø 3/4” 18 mmInstalling the water filter 14 Installing the water filter15 Connecting the appliance Connecting the appliance