Side-by-side installation
Fig. 60
u Unscrew retaining plates Fig. 60 (1,4) and remove rail Fig. 60 (3).
u Fit retaining plate Fig. 60 (1) to the lower part of the hinge side by inserting two screws Fig.60 (2) into the pre- cut holes.
u Slide rail Fig. 60 (3) into the retaining plate Fig. 60 (1) from above.
u Push second retaining plate Fig. 60 (4) onto the rail from above and screw onto the center of the side wall.
u Push third retaining plate Fig. 60 (4) onto the rail from above and screw onto the top part of the side wall.
Join appliances:
Fig. 61
u Position the appliances next to each other with a gap of approximately 13/32 '' (10 mm) such that they are flush at the front.
u Open the door.
Fig. 62
u Loosen covers Fig. 62 (10) using a screwdriver and pull inwards to remove.
29
