Manuals
/
Liebherr
/
Kitchen Appliance
/
Refrigerator
Liebherr
RI 1410/ RBI 1410/ FI 1051 manual Installation Instructions
Models:
RI 1410/ RBI 1410/ FI 1051
1
1
34
34
Download
34 pages
36.52 Kb
1
2
3
4
5
6
7
8
<
>
Install
Dimension
Connecting the appliance
Setting up the appliance
Adjusting the door opening angle
Page 1
Image 1
Installation Instructions
Refrigerators and freezers,
built-in
RI 1410/ RBI 1410/ FI 1051 230609 7084314 - 00
Page 2
Page 1
Image 1
Page 2
Contents
Refrigerators and freezers, built-in
Installation Instructions
RI 1410/ RBI 1410/ FI
Contents
General safety information
1 General safety information
2 Setting up the appliance
Setting up the appliance
Fig. 1 Single-unit installation
Planning information 3 Planning information
Measurements that are marked with A depend on the handle used
Planning information
Planning information
Fig. 4 Side-by-side installation SBS24I3 with 80” or 84” ventilation grille
5 Air circulation in the kitchen cabinet
Cabinet Opening Dimensions 4 Cabinet Opening Dimensions
6 Door swing clearance
Door swing clearance
Fig. 10 110, hinges on left
Door swing clearance
Fig. 11 90, hinges on left
Door swing clearance
Fig. 12 110, hinges on right
Door swing clearance
Fig. 13 90, hinges on right
Door swing clearance
7 Fitting décor panels
Fitting décor panels
7.1 Fitting décor panels
Screws for door frames
Fitting décor panels
7.2 Décor panel dimensions - Framed panels
If the thickness of the custom panels is less than 1/4 in 6.4 mm
u an edge must be routed around the panel to ensure a proper fit
3 Backer Panel
Overlay Panel
Spacer Panel
Overlay panel Spacer panel Backer panel
Fitting décor panels
7.3 Side-by-side installation
Overlay panel
FI 1051, RBI 1410, RI
Spacer panel
Backer panel
Overlay panel
Fitting décor panels
3 Backer panel
Spacer panel
8 Changing the door hinges
Changing the door hinges
7.3 Cut-out for glass window WFI
1061
8.3 Remove door
8.2 Remove soft stop unit bottom
Changing the door hinges
Fig. 30 u Push panel forward over the damper bracket Fig
8.4 Swapping bearing parts
8.5 Swapping the clip-on frame
8.6 Fitting the door
Changing the door hinges
8.8 Fitting soft stop mechanism top
8.7 Fitting the soft stop mechanism bottom
Changing the door hinges
Fig. 36 u Loosen cover Fig. 36 9 from the panel Fig. 36 1 and
9 Adjusting the door opening angle
Adjusting the door opening angle
8.9 Aligning the door
Removing the soft stop unit u Open the door
10 Water connection
Water connection
Water pressure
MPa bars
Fit side installation strip
12 Single unit installation
Anti-tip device
11 Anti-tip device
Install end strip
Single unit installation
Secure side installation strips
Install the appliance in the recess
Fit handles overlay panel
u Fit décor panels see Fit handles framed panel
Single unit installation
u Insert water filter see 14 .* If no water filter is used
Fit side installation strips
Side-by-side installation 13 Side-by-side installation
Join appliances
Side-by-side installation
Side-by-side installation
Fit upper ventilation grille 80” or 84”
Fit end strip
Secure side installation strip
Side-by-side installation
Install the appliance in the recess
u Fit décor panels see Fit handles framed panel
Side-by-side installation
Fit handles overlay panel
Fig. 74 Handles from the manufacturer Ø 3/4” 18 mm
14 Installing the water filter
Installing the water filter
15 Connecting the appliance
Connecting the appliance