Return to Section
Return to Section TOC
Return to Master
Return to Master TOC
MOTOR REMOVAL
PROCEDURE
1.Remove input power to the
2.Remove the motor and tach cable from the
3.Perform the Tach Board Removal Procedure.
4.Using the slot head screwdriver remove the two screws mounting the tach housing to the drive motor. Remove the tach housing from the drive motor.
5.Using the phillips head screwdriver remove the cover plate adaptor. See Figure F.16
6.Using the 5/16" nutdriver remove the clamp holding the connection box to the drive motor.
7.Carefully remove the connection box being careful not to stretch the leads.
DRIVE
MOTOR 
