LINDY CPU IP Access Switch | User Manual |
4.2 Starting Up
To bring up the Windows Client Main Screen, run the CPU IP ACCESS SWITCH Client either by double clicking its icon, or by keying in the full path to CN6kClient_x_x_xxxLindy.exe on the command line.
If this is the first time that you are running the program, a dialog box appears requesting you to input your serial number.
If you don’t know what it is, contact the CPU IP ACCESS SWITCH administrator. Key in the serial number - 5 characters per box - then Click OK.
Note: You must have DirectX 7.0 or higher installed on your computer. If not, the Client program will not load.
The Connection Screen
When the Windows Client starts, a Connection Screen, similar to the one below, appears:
27
