Loewe Centros 2172 HD manual Nicam auto/off, Setting the Clock, Manual Setting of the Date / Time

Initial Installation

NICAM auto/off

This DVD recorder can receive Hi-Fi sound transmis- sions in NICAM Stereo. Bad reception can however cause distortion. You can switch the function off (“off“).

1. Use	/	to select a program in the “Program
List“ menu, and press OK. The options are
displayed on the left side of the “Program List“
menu.
2. Use	/	to select the “NICAM auto/off“

option from the program list and press OK. If you select “auto“, “NICAM“ appears under the program shown in the small picture.

Setting the Clock

If the automatic channel search is fi nished, the date and time will also be set automatically (de- pending on the broadcasting station), the same is true when the power supply returns after a power cut or after the mains cable has been unplugged. The “Automatic“ option must be set to enable this.

Auto Programming
Program Edit
Clock Set		Automatic
TV Aspect		Manual
Display Mode
Decoder at AV1	Date		- -	/	- -
	Year
PBC			- - - -
Factory Set	Time			:
			- -		- -
Power Save Mode

1.Press .

The menu is displayed.

2.	Select the “General“ option with		/	.
3.	Press	to call up the second level.
4.	Select the “Clock“ option with		/	.
5.	Press	to call up the third level.

6. Press / to select the “Automatic“ option and then press OK.

7. Press , to quit the menu.

Note: Check whether the automatic year and date setting is correct. If necessary they must be set manually.

Manual Setting of the Date / Time

It is possible that the television station may broad- cast incorrect date and / or time information or no information at all and that the DVD recorder sets the incorrect time. If this is the case we recommend that you set the clock manually.

1.Follow steps 1 - 5 as described above (Automatic Clock Setting).

2. Use	/	to select the “Manual“ option and
then press OK.
		Auto Programming
		Program Edit
		Clock Set		Automatic
		TV Aspect
				Manual
		Display Mode
		Decoder at AV1	Date		- -	/	- -
			Year
		PBC			- - - -
		Factory Set	Time
					- -	:	- -
		Power Save Mode

3.Then enter the necessary date and time informa- tion.

/(left/right): Moves the cursor to the previous or next column/line.

/(up/down): Changes the setting at the current cursor position.

4.You can return to the 2nd level by pressing OK

or you can close the menu with .

TV Aspect

You can choose:

-4:3: Select this setting if a television set with 4:3 picture format is connected.

-16:9: Select this setting if a widescreen televi- sion set with 16:9 picture format is connected.

Auto Programming
Program Edit
Clock Set
TV Aspect	4:3
Display Mode
	16:9
Decoder at AV1

PBC

Factory Set

Power Save Mode

- 20